Typical UK guide figures: £1,140–£1,800 for fitted uPVC French doors
JobPrices publishes this range for uPVC French doors fitted in an existing opening, including VAT. It is a UK guide estimate, not a County Windows price, and does not describe creating a new opening or every door material.
| Example | Range | What it covers |
|---|---|---|
| uPVC French doors in an existing opening | £1,140–£1,800 | JobPrices UK guide estimate including fitting and VAT; dimensions and specification vary. |
| Straightforward window-to-door conversion | £1,400–£2,200 | Checkatrade supply-and-install guide; VAT is not explicit in the cited summary. Confirm building work and finishing separately. |
Cost sources: JobPrices: uPVC French doors fitted in an existing opening, including VAT; Checkatrade: window-to-French-door conversion scope and costs.
Price a replacement and a conversion separately
Replacing an existing pair of doors is different from extending a window opening down to floor level. A direct replacement starts with an opening that already serves as a doorway. A conversion can involve wall removal, structural assessment and alterations to internal and external finishes. The two examples above retain their different scopes rather than presenting every project as a simple doorset purchase.
County Windows offers uPVC and aluminium French doors. This fitted range concerns uPVC in an existing opening, not aluminium. A conversion needs its building work assessed. Do not order from rough dimensions before the opening and finished floor levels are established.
The complete doorset determines the useful opening
French doors are a pair of hinged doors. The overall frame size and the way the two leaves operate determine everyday access and the wider opening when both are open. Decide which leaf you would normally use, where the handles should sit and whether the furniture route through the opening is practical. A larger advertised glazed area does not automatically mean a wider clear passage.
Side panels can form part of a broader glazed arrangement, but they need their own specification and allowance. Check whether a price covers only the pair of doors or also adjacent glazing. Ask for the outside and inside finish, glass type and hardware to be listed. Comparing a basic pair with a wider doorset containing side panels is not a like-for-like price comparison.
Thresholds and opening direction affect daily use
Outward-opening doors need clearance from patio steps and planting; inward-opening doors need room beside furniture and curtains. Discuss the arrangement available for the proposed system before ordering, rather than assuming the direction can be changed later.
A threshold should be assessed with the finished internal floor, external level and drainage. A low-looking threshold in a photograph is not a complete weatherproofing design. Mention mobility needs and any step between the room and garden at the start. Extra paving, steps or drainage work should be identified separately instead of assumed to sit inside a standard fitted-door allowance.
Clarify glass, building work and finishing
Door glazing needs an appropriate safety specification, and privacy or decorative choices can alter the product. Ask which glass and complete doorset performance are included. If you are replacing a window, discuss structural support and the relevant approval requirements with the appropriate professionals. An existing lintel should not be assumed suitable for a changed opening simply because it is already there.
For a conversion, list internal plastering, floor edges, external finishes, waste disposal and any electrical changes that need assessment. The Checkatrade conversion range is a broad supply-and-install example with VAT unclear in its summary; obtain a VAT-inclusive total and specific inclusions. It is not evidence that every load-bearing wall alteration or garden step can be covered by the same amount.
Make the enquiry specific to your garden connection
Photograph the opening from both sides, including the whole wall and the floor or patio level. Say whether doors already exist or whether a window would be converted. Give approximate dimensions, the preferred material and any desired side panels. If access is narrow or the room has limited swing space, show that too. These details help separate a straightforward replacement from a broader building project.
Compare the complete doorset and installation scope before deciding. Bi-folds suit a different opening arrangement, so a panel-system price is not a direct substitute for a French-door quotation. Explore the existing French door product page, then request a survey-based price for your opening. Keep the third-party guide figures as budget context rather than a fixed offer or a promise about what your finished project will cost.
Sources and further reading
- JobPrices: uPVC French doors fitted in an existing opening, including VAT
- Checkatrade: window-to-French-door conversion scope and costs
Discuss your home with County Windows
Explore our French doors or request a quotation for your property. The figures above help with initial budgeting; the final price depends on a survey and the agreed specification.

